深圳市利盛达科技有限公司 利盛达科技让电源设计更便捷可靠|联系电话:13928434054
请输入料号
EUP8207,3A双节开关充电

EUP8207】3A双节开关充电

  • EUP8207 所属品牌:EUTECH
  • 将EUP8207添加至收藏夹 用邮件咨询EUP8207的相关信息 就EUP8207 QQ咨询,也可电话至139 2843 4054。

  • 感谢您访问利盛达官网!
    如有任何问题,请联系新市场拓展部24小时服务热线:139 2843 4054;
    sales@lsdtek.com;
EUP8207 详细介绍
相关商品: EUP8207-84DIR1 BQ2057

EUP8207概述
EUP8207是一款使用电流模式PWM操作降压交换式架构的恒定电流,恒定电压的锂离子电池充电器,其工作频率为恒定的500kHz。可提供单节(4.2V)或双节(8.4AV)锂离子电池充电。
它设定包含涓流,恒流与恒压三个阶段充电,使用外部侦测电阻进行±10%精度的充电电流调节,其内部使用分压电路与精准的参考电压进行每节电池4.2V±1%精度的充电终止电压控制。 内部比较电路进行充电终止条件检测,当充电电流小于EOC(end-of-charge)或者内部定时器计时终止都将停止充电循环。EUP8207将检测单节电池电压是否小于4.05V来判断是否自动重置充电循环。当直流输入电源移除时,EUP8207自动进入休眠模式以减少电池端的供电电流。EUP8207提供SOP-8与TDFN-10封装。

 

EUP8207特点
•  宽输入电压范围: 
    4.8V to 20V–4.2 Version
    8.9V to 20V–8.4 Version
    8.9V to 20V–8.4A Version
•  固定500kHz开关频率
•  充电电流终止指示输出
•  七小时的安全充电止计时
•  ±1%恒压充电精度
•  ±10%恒流充电精度
•  低于10uA的电池反相供电电流
•  电池低电压涓流充电
•  自动电池重置充电
•  低功耗休眠模式
•  电池温度检测
•  提供SOP-8与TDFN-10封装
•  符合RoHS规范及Pb-Free

 

EUP8207应用
•  小型笔记型计算机
•  可携式DVD播放器
•  掌上型设备
 

EUP8207 DESCRIPTION
The EUP8207 is a constant current, constant voltage Li-Ion battery charger controller that uses a current mode PWM step-down (buck) switching architecture. With a 500kHz switching frequency, the EUP8207 provides a small, simple and efficient solution to fast charge one (4.2V) or two (8.4V) cell lithium-ion batteries.
The EUP8207 charges the battery in three phases: conditioning, constant current, and constant voltage. An external sense resistor sets the charge current with ± 10%
accuracy. An internal resistor divider and precision reference set the final float voltage to 4.2V per cell with ±1% accuracy. An internal comparator detects the near
end-of-charge condition while an internal timer sets the total charge time and terminates the charge cycle. The EUP8207 automatically re-starts the charge if the battery
voltage falls below an internal threshold, 4.05V per cell.The EUP8207 also automatically enters sleep mode when DC supplies are removed. The EUP8207 is available in the 8-lead SOP and 10-lead TDFN packages.

 

EUP8207 FEATURES 
 ·  Wide Input Supply Voltage Range:
     4.7V to 20V – 4.2 Version 8.9V to 20V – 8.4A Version
 ·500kHz Switching Frequency
 ·End-of-Charge Current Detection Output
 ·7 Hour Charge Termination Timer
 ·± 1% Charge Voltage Accuracy
 ·± 10% Charge Current Accuracy
 ·Low 10µA Reverse Battery Drain Current
 ·Automatic Battery Recharge
 ·Automatic Trickle Charging of Low Voltage Batteries
 ·Automatic Sleep Mode for Low Power Consumption
 ·Battery Temperature Sensing 
 ·Stable with Ceramic Output Capacitor
 ·8-Lead SOP and 10-Lead TDFN Packages
 ·RoHS Compliant and 100% Lead (Pb)-Free

 


EUP8207 APPLICATIONS 
 ·Small Notebook Computer
 ·Portable DVD
 ·Handheld Instruments

 


相关文章:
新能源汽车与储能系统发展提速 致锂电池上游原料价格上涨
便携嵌入式系统电源设计的注意事项以及设计中应遵循的准则
锂电池大型化趋势明显 有望应用于大型工业